Panasonic Insertion
AV132
The small and efficient AV132 has a performance of 30,000 cph. Due to the stand-out features the AV132 is a high-speed axial THT-insertion machine.
Features
Supplied with a 40 or 80 component feeder with optional jumper wire, the compact supply unit configuration of the AV132 can fit both ammo pack and reel. The dual partition configuration enables a fast changeover. The next job can be set up while the current one is being processed.
Capable of inserting components in four directions: 0°, 90°, 180°, and 270°, the AV132 optimizes productivity by simultaneously handling 26 and 52mm taped components and providing fast, full auto-recovery.
Features
The AV132 can reduce loading times by running two PCBs simultaneously, enabling efficient production due to a speed of 0.12s/component and a transfer speed of 2s/PCB.
The fixed feeder unit and the out-of-component detection feature allow to replenish components while maintaining long-term non-stop runs.
Preparation in advance or equipment operation during component change-over is possible.
| Model ID | AV132 | |
|---|---|---|
| Model No. | NM-EJA6A | NM-EJA5A |
| PCB dimensions (mm) | L 50 x W 50 to L 508 x W 381 | |
| Max. speed *1 | 0.12 s/component | |
| No.of component inputs | 40 + 40 + JW (JW is optional) | 40 + JW (JW is optional) |
| Applicable components | Resistors1/8 W,1/6 W,1/4 W,1/2 W, Jumper wire (tin-plated wire), Diodes, Cylindrical ceramic capacitor | |
| PCB exchange time | about 2.0 s | |
| Insertion direction | 4 directions (0 °, 90 °, 180 °, 270 °) | |
| Electric source *2 | 3-phase AC 200 V, 3.5 kVA | |
| Pneumatic source | 0.5 MPa, 200 L/min (A.N.R.) | |
| Dimensions (mm) | W 3 106 x D 2 300 x H 1 575 mm *3 | W 2 104 x D 2 300 x H 1 575 *3 |
| Mass | 2 648 kg | 2 228 kg |
- On condition
- Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V
- Excluding signal tower
- Only for main body
* Values such as maximum speed may vary depending on operating conditions.
* Please refer to the “Specification” booklet for details.